Indian-Origin researcher uses Wi-Fi to power camera In a first such demonstration, an Indian-origin researcher has developed a system that uses Wi-Fi Internet signals to beam power to remote devices such as a surveillance camera. Developed by doctoral student Vamsi Talla and colleagues at University of Washington in Seattle, the system is known as power-over-Wi-Fi.The idea is simple in concept. Wi-Fi radio broadcasts are a form of energy that a simple antenna can pick up. Until now, Wi-Fi receivers have all been designed to harvest the information that these broadcasts carry.Talla simply connected an antenna to a temperature sensor, placed it close to a Wi-Fi router and measured the resulting voltages in the device and for how long it can operate on the remote power source alone.Even more ambitiously, the team also connected a camera to their antenna. This was a low-power sensor capable of producing 174×144 pixel black and white images, which requires 10.4 milliJoules of energy per picture. To store energy, they attached a low leakage capacitor to the camera which activates when the capacitor is charged and continues operating until the voltage drops to 2.4 Volts.The images were stored in a 64KB random access memory (RAM). In the subsequent tests, the camera performed remarkably well. �The battery-free camera can operate up to [about five meters] from the router, with an image capture every 35 minutes,� Talla told MIT Technology Review.By adding a rechargeable battery, he increased the distance to seven meters. The router could even power the camera through a brick wall, demonstrating that it would be possible to attach the device outside while keeping the power supply inside.�The technology would be hugely useful for surveillance, perhaps connected to a movement sensor to trigger the camera when something moves in its field of view,� Talla noted.The team also connected their antenna to a Jawbone fitness tracker and used it to recharge the battery that powered it. �Using this, we charge a Jawbone device in the vicinity of the power-over-Wi-Fi router from a no-charge state to 41 percent charged state in 2.5 hours,� the team pointed out.According to the MIT report, power-over-Wi-Fi could be the enabling technology that finally brings the �Internet of Things� to life.IANSTags: Camera Over Wi-Fi Signals, Internet of Things, Power-over-Wi-FI, University of Washington, Vamsi Talla, Wi-fi, Wi-Fi Routers